The bucket-wheel car loader reclaimer is of low-speed rotation bucket wheel. The rigid bucket wheel is of huge digging capacity, so it can be used to unload almost any bulk material, such as bulk salt, coal and iron ore subject to easy caking or high grindability. 

The flow direction of the material during the discharge process is as follows:

1) The material is dug by the formatless bucket wheel;

2) The unloaded material of the bucket wheel passes through the grid installed in the discharge chute, and separates the iron block mixed in the material and the extra-large block material;

3) The material is unloaded on a short feeding belt machine through the discharge chute, which is equipped with a scraper ruler, which can return the excess material to the cabin;

4) The feeding belt machine transfers the materials to the corrugated flange belt elevator;

5) The hoist lifts the material to the top and discharges it through the discharge pipe;

6) The material falls into the transfer funnel at the end of the boom through the discharge pipe;

7) Transfer the funnel to feed the materials to the boom belt conveyor, which is laid along the boom and connects the bucket elevator and the ship unloader center;

8) The materials coming out of the boom belt conveyor fall into the buffer silo through the material trough;

9) A belt feeder is installed under the buffer silo, and the materials are supplied to the telescopic belt conveyor by the feeder;

10) The telescopic belt conveyor is reversible, and its function is like a mechanical switch, which can be used for any of the multi-way belt conveyors laid for the terminal.

When the bucket wheel loader is operating, it seems to be in a stationary state from a distance, because the rotating column suspended at the end of the boom enters the cabin, relying on the rotation of the bucket wheel and the rotation of the column body, its material extraction range is large, and the speed of the two is very low.